Tool and Work Holding
Collet chucks, tap holders, vises and clamping systems, and how holding affects runout and finish.
- CNC Machinery
- CNC Machining 101
- Cutting Fluids
- Drilling
- Indexable Tooling
- Milling
- Threading
- Tool and Work Holding
-
SK vs. ER Collet Chucks: A Machinist’s Guide to Choosing the Right Toolholding System
SK collet chucks cut runout to 5 microns and roughly double the clamping force of ER. Here is where the upgrade actually pays off.
-
SFM Chart by Material: Max’s Guide to Speeds, RPM and Chip Load
Blown up end mill, chattered finish, burned edges that should have been clean. Walk the floor of the shop after a bad run and the tool gets blamed first. Sometimes,…
-
Why Taps Break at Reversal: A Guide to Synchronous Tap Holders
A tap is the only tool that reverses direction mid-cycle. Learn why that moment breaks tools and how synchronous tap holders like Emuge-Franken Soft Synchro protect them.
-
Emuge-Franken EvoGrip – 5-Axis Clamping & Work Holding
Discover how the EvoGrip system delivers nearly 17k lbs clamping force while reducing setup times by 80% – and why it’s essential for competitive machine shops.
Need help choosing?
Describe your application and we will work through it with you.